dB-100 Tear Switch Ramsey Tear Switch

• Customization: Available
• Type: Touch Switch
• Principle: Touch
• Model NO.: DB-100
• Wires: Two-Wires
• Standard: Standard
• Application: Conveyor Belt
• Size: 3kg
• Certification: ISO
• Output: 2 Spdt
• Grade: IP65
• Acting Force: 2kg
• Material: Cast Aluminum
• Voltage: 240/380V
• Transport Package: Cardboard Box
• Specification: 3kg
• Trademark: RAMSEY
• Origin: China
• Production Capacity: 10000

Product Description

Products
DB-100 Tear Switch - Belt Tear Protection
In the event of damage to the belt due to tearing, poking, damage at the twisted knot or sharp objects protruding from the belt, the tear switch can provide an interlock signal to the monitor or shut down the conveyor to cause further damage. Rip switches should be mounted in pairs on both sides of the belt, connected by two sections of wire rope (which are sheathed in a polyethylene jacket). One end of the rope is fixed to a support bracket and the other end is attached to a spring-loaded ball on the rip switch. The two sections of rope form a closed loop under the belt in line with the belt groove pattern. When an object pokes through or tears the belt hanging down and sweeps down one or both of the steel ropes, the spring-loaded ball is pulled out of its base, causing the two microswitches to signal an alarm or turn off the conveyor.
 Product Features
Simple and solid structure, no maintenance required
Universal housing design for easy installation
Suitable for corrosive environments
Body-type rear enclosure for easy wiring and maintenance
Large capacity switching contacts
Only 2.0KG force is required to trigger the switch.
Technical Specifications
Outputs: 2 SPDT
Enclosure protection grade: IP65
Acting force: 2kg
Large contact capacity: 125, 250 or 480V/21A
Switches can be normally open or normally closed as required.
Various protection classes suitable for explosion-proof and special environments.
Applications
Belt Conveyor