20-59 Ramsey Mercury-Free Tilt Probe Switch

• Customization: Available
• Type: Tilt Switch
• Principle: Touch
• Model NO.: 20-59
• Wires: Two-Wires
• Standard: Standard
• Application: Conveyor Belt
• Size: 1.5kg
• Certification: ISO
• Material: Foundry Iron
• Voltage: 24V/220V
• AMPS: 1A/0.5A
• Grade: IP65
• Perspectives: 15 °/25 °
• Transport Package: Cardboard Box
• Specification: 1.5kg
• Trademark: RAMSEY
• Origin: China
• Production Capacity: 20000

Product Description

Mercury-free tilt switch
Mercury-free tilt sensing switches can completely replace mercury tilt switches
1. All materials of mercury-free switches can meet the requirements of environmental protection, while mercury switches cannot meet the requirements due to their own material problems..
2. Mercury switch because of the conduction mode is through the metal bead with the trigger guide pin energized to generate signals, generally speaking, the conduction effect is more stable.
3. Mercury-free switches are metal housings with good structural strength.
4. It can be used in harsh environmental conditions. Since the switch is sealed, it can be used in environments with oil, steam, dust and corrosive gases.
5. The external force required to turn on and off is small. As long as a little external force to make the switch tilt, it can be moved, so that the switch to realize the on-off.
6. Good electrical conductivity, the contact resistance between the electrodes is generally less than 100mΩ.
7. The current allowed to pass through the switch depends on the material of the electrodes, the maximum allowable current is 10A.
8. Can work reliably for a long time.
9. As long as it is tilted to a certain angle, it can be turned on or off, and thus can be used as a vibration-sensitive element.
10. Fully sealed device, completely sealed package, can be waterproof, dustproo
11. Simple signal, simple circuit line design, and economical price.
12. When the product is upright, it is in the on (off) state. When the product is tilted in either direction and exceeds 15 degrees, the switch will be in the off (on) state.
Mercury-free tilt switch probes
        When a vertically suspended tilt switch probe is subjected to an external force and deviates from the vertical position by more than 15 degrees, the metal ball contact inside the switch is actuated and the normally closed contact is opened. When the external force is removed, the tilt switch returns to the vertical position and the metal ball contacts close again. The change of contact opening and closing in the tilt switch is used to judge the working condition of the equipment, so that timely measures can be taken to achieve the purpose of safety protection.

Features:
· Tilt switch can be used as a stand-alone probe or with a control unit
· Rugged and corrosion resistant
· Easy to install
· Controls are of printed circuit board construction
· All probes are supplied with mounting accessories
 Technical specification
· Power: 220 VAC ± 10%, 47 - 62 Hz, 10W
· Output: One DPDT contact, rated capacity 5 Amp / 220 VAC or 5 Amp/28VDC non-inductive loads
· time delay: adjustable from 0-10 seconds
· Jumper: allows switch vertical or tilt state to be normalized
 Applications:
· Chute or adapter blockage detection
· Conveyor belt runout detection
· Unloading probe for tippers
 for belt or vibratory feeder lack of material or no material detection
Technical Specifications
contacts: normally closed, non-mercury switch, 250mA/24 VDC non-inductive loads
· Optional: 0.8A at 240VAC/1.5A at 120VAC
· Temperature rating: -32°C to +82°C
· Case: cast iron with nickel-chromium plated surface
· Tilt: Angle 15°